LIST OF PRODUCTS

OF UKRAINIAN OEMS PRESENTED BY DEFTECH GLOBAL LIMITED (MANUFACTURE AND REPAIR)

FOR THE TANK T-55M AND ITS MODIFICATIONS
For the fire control system VOLNA
  1. Range finder КДТ-2 composed of: transceiver, indication unit БИ, control unit ПУ, electric unit ЭБ, cables set, rimmed protective glass, spare parts, tools and equipment.
  2. Range finder КДТ-3 composed of: transceiver, rimmed protective glass, indication and control unit БУИ, cables set, spare parts, tools and equipment.
  3. Ballistic computer БВ-55.
  4. Voltage converter 9С831 (ПН-1,5) for the 9К116-1 sighting BASTION.
  5. КА-1С automatic equipment case.
  6. For the stabilizer CYCLONE-М1.
  7. Electronic amplifier (functional analog of БК2.087.014).
  8. Tank intercom system (ТПУ Р-174).

FOR THE TANK Т-55

For the CYCLONE stabilizer
  1. Electronic amplifier (functional analog of БК2.087.016)

FOR THE TANK T-62M AND ITS MODIFICATIONS

  1. Ballistic computer БВ-62 for the fire control system VOLNA.
  2. Voltage Converter 9С831 (ПН-1,5).
  3. Range finder КДТ-2 composed of: transceiver, indication unit БИ, control unit ПУ, electric unit ЭБ, cables set, rimmed protective glass, spare parts, tools and equipment.
  4. Range finder КДТ-3 composed of: transceiver, rimmed protective glass, indication and control unit БУИ, cables set, spare parts, tools and equipment.
  5. КА-1С automatic equipment case.
  6. For the stabilizer METEOR M, METEOR M1
  7. Electronic amplifier (functional analog of БK2.087.014, БK2.087.016).
  8. Tank intercom system (ТПУ Р-174)

FOR THE TANK Т-72, Т-72А, T-72Б AND ITS MODIFICATIONS

For the Sighting 1А40, 1А40-1, ТПД-К
  1. Range finder unit БИД-1.
  2. Traffic signal case КДС-1-2C.
  3. Engine shutdown unit БОД-1С./li>
  4. Ventilator control case КУВ11-6-1С.
  5. Electronic case К1 for 2Э42 stabilizer.
  6. Voltage Converter 9С831 (ПН-1,5).
  7. КА-1С automatic equipment case.
  8. Tank intercom system (ТПУ Р-174).

FOR THE BMP-2 AND ITS MODIFICATIONS

For 2Э36 stabilizer Electronic modules, included into control unit (БУ)
  1. Control unit ПБ2.390.179-01, ПБ2.390.179-02.
  2. Amplifier ПБ2.035.030-01 У-ГН, У-ВН.
  3. For a fire control system
  4. Relay case KR40-2C.
  5. Traffic signal case КДС-1-2C.
  6. Tank intercom system (ТПУ Р-174)

FOR THE BMP-3 AND ITS MODIFICATIONS

  1. Voltage Converter 9С831 (ПН-1,5).
  2. Range finder КДТ-2 composed of: transceiver, indication unit БИ, control unit ПУ, electric unit ЭБ, cables set, rimmed protective glass, spare parts, tools and equipment.
  3. Range finder КДТ-3 composed of: transceiver, rimmed protective glass, indication and control unit БУИ, cables set, spare parts, tools and equipment.
  4. Relay case KR40-2C.
  5. Traffic signal case КДС-1-2C.
  6. Tank intercom system (ТПУ Р-174).

RANGE FINDER КДТ-2

Range finder КДТ-2 is designed to measure the range up to 4 km-distance. The range finder consists of the transceiver, indication unit (БИ), control unit (ПУ), cables set, rimmed protective glass, spare parts, tools and equipment, electric unit (ЭБ). The range finder is designed to be installed on Т-55М and Т-62М and their modifications as the components of the fire control system “VOLNA” on BMP-3.
  1. Transceiver;
  2. Indication unit (БИ);
  3. Control unit (ПУ);
  4. Cables set;
  5. Rimmed protective glass;
  6. Spare parts, tools and equipment;
  7. Electric unit (ЭБ).

RANGE FINDER КДТ-2

RANGE FINDER КДТ-3

Range finder КДТ-3 is designed to measure the range up to 4 km-distance. It is designed for installation as a component of the fire control system “VOLNA”. Functionally, the range finder КДТ-3 is analogous to the range finder КДТ-2 but it differs by its construction. The single unit БУИ КДТ-3 encompasses the functions of electric unit, indication unit and control panel. It is designed for installation on the Т-55M, Т-62M, BMP-3 and their modifications.

RANGE FINDER КДТ-2

Range finder КДТ-2:
Range finder КДТ-3:
  1. Transceiver;
  2. Rimmed protective glass;
  3. Indication and control unit (БУИ);
  4. Connecting cable;
  5. Spare parts, tools and equipment.

RANGE FINDER КДТ-2

Range finder КДТ-2:

RANGE FINDER UNIT БИД-1

Range finder КДТ-2 is designed to measure the range up to 4 km-distance. The range finder consists of the transceiver, indication unit (БИ), control unit (ПУ), cables set, rimmed protective glass, spare parts, tools and equipment, electric unit (ЭБ). The range finder is designed to be installed on Т-55М and Т-62М and their modifications as the components of the fire control system “VOLNA” on BMP-3.


RANGE FINDER КДТ-2

Range finder КДТ-2:

BALLISTIC COMPUTER БВ-55, БВ-62

The product БВ-55, БВ-62 is a microprocessor-based computing unit that processes input data on the target and firing conditions and provides the predicted data values: i.e. range angle as signal analogs and lateral lead angle as a digital code. It functions as a component of fire control system (FCS) “VOLNA”. It is designed for installation on the Т-55M, Т-62M and their modifications.


AMPLIFIER

The amplifier is designed for the reinforcement and phase-sensitive flattening signals, coming from angle-data and velocity transmitters of the gyroscopic stabilizer. The amplifier load is represented by electromagnet amplifying windings of the hydraulic booster and polar relay windings РП-5. It is designed for installation on the T-55, Т-55M, Т-62M and their modifications. Full functional analog of the electronic amplifi er unit БK2.087.014, БK2.087.016. It is used as a component of stabilization systems “CYCLONE”, “CYCLONE М-1”, “METEOR M”, “METEOR M1”.


AMPLIFIER

The amplifier is designed to convert the control signal coming from the control unit into a pulse-width signal and to strengthen its power to the extent needed to control the executive engines ЭДМ-14 and ЭДМ-20. The amplifi er is designed for installation as a component of 2Э36 BMP-2 (IFV-2) stabilizer and its modifi cations. Full functional analog of the Amplifier ПБ2.035.030-01 У-ГН, У-ВН.


КА-1С (AUTOMATIC EQUIPMENT CASE)

It is designed for automatic control of motor power supply (МУ-431 or ДВН-1 type) of opening and closing gear of the protective cap at “NEVA” system and circuit switching of the signal “D” turning on. It is designed for installation on the T-55M, Т-72Б, Т-62M and their modifications.


КУВ11-6-1С (VENTILATOR CONTROL BOX)

КУВ11-6-1С (ventilator control box) is designed to function as a component of the fire control system (УА ППО). The fire control systems УА ППО can be used for both automatic and manual fire fighting. The direct task of КУВ11-6-1С is ventilator and booster turning on, as in case of fire event both ventilator and booster are turned off in order to cut off the oxygen access providing for burning; and in case of poisonous agents infiltration to the object, it is turned on for ventilation reinforcement. It is designed for installation on the T-72, T-72A, Т-72Б, Т-55 and their modifications.


WATER SENSOR AMPLIFIER 11-02

Water sensor amplifier 11-02 is designed to determine the presence of water within the vehicle. It is designed for installation on the BTR-3E.


БОД-1С (ENGINE SHUTDOWN UNIT)

In case of reverse phase sequence the unit signals for the fuel cutoff at sensor rotation speed of 4.4 ± 0.8с-1 (275 ± 50 rotations/min). The signal for lamps lighting at critical engine rotations is emitted at sensor rates 18±0.8с-1 (1125 ± 50 rotations/min) under any phase sequence. It is designed for installation on the Т-72 and their modifications.


ЭСА (ELECTRIC WELDING UNIT)

It is designed to control voltage while welding, i.e. the unit prevents voltage exceeding 70V; in case of overranging the nominal value, the unit automatically interrupts welding power supply. It is used in engineer vehicles of BREM (armoured recovery vehicles) and BTS (multipurpose armoured towing vehicles) types.


VOLTAGE CONVERTER 9С831 (ПН-1,5)

Voltage converter 9С831 ПН-1,5 is designed for joint functioning with 1К13 sight. After voltage is turned on, the unit produces Uout=150В and In=10А during (3-5) seconds, then Uout voltage is lowered up to (60-70) V, and In increases up to (21±1) А. It is designed for installation on the T-72, T-72A, Т-72Б, Т-55M, T-62M, BMP-3 and their modifi cations.


CONTROL UNIT

The control unit is designed to summarize, to convert the amplification of control signals of the verticaland-horizontal guidance drives, as well as to switch circuits in order to ensure the required operating mode of 2Э36 BMP-2 stabilizer. The control unit is designed for installation as a component of 2Э36 BMP-2 (IFV-2) stabilizer and its modifications. Full functional analog of the Control unit ПБ2.390.179-01, ПБ2.390.179-02.


CONTROL PANEL ПУ-509М FOR THE ENGINE
CONTROL SYSTEM УТД-20

ПУ-509М product is a control equipment designed to control the engine УТД-20 functioning, on the APC BTR-3E, it ensures collection, data processing from engine systems sensors and implementation of the following automatic modes:
  • engine emergency shut-down;
  • ensures coolant pumping to the engine in case of its stop;
  • emergency situation signals emission to the exterior light indicators.
It is designed for installation on the BTR-3E.


TRAFFIC SIGNAL BOX КДС-1-2C

КУВ11-6-1С (ventilator control box) is designed to function as a component of the fire control system (УА ППО). The fire control systems УА ППО can be used for both automatic and manual fire fighting. The direct task of КУВ11-6-1С is ventilator and booster turning on, as in case of fire event both ventilator and booster are turned off in order to cut off the oxygen access providing for burning; and in case of poisonous agents infiltration to the object, it is turned on for ventilation reinforcement. It is designed for installation on the T-72, T-72A, Т-72Б, Т-55 and their modifications.


ELECTRONIC CASE К1

Electronic case К1 of the 2Э42 stabilizer is designed for processing the signals from tank gyroscopic sensors and controlling the motor control of the armament unit. It is designed for installation on the Т-72 and their modifications.


TANK INTERCOM SYSTEM (ТПУ Р-174)

Intercommunication and commuting equipment (ТПУР-174) is designed to provide the internal telephone communication between the crew and their commander. It enables the crew to enter the external communication via radio. It is designed for installation on armored vehicles. Product repair. Note: it is manufactured within customer’s gauge body.


RELAY CASE KR40-2C

КУВ11-6-1С (ventilator control box) is designed to function as a component of the fire control system (УА ППО). The fire control systems УА ППО can be used for both automatic and manual fi re fighting. The direct task of КУВ11-6-1С is ventilator and booster turning on, as in case of fire event both ventilator and booster are turned off in order to cut off the oxygen access providing for burning; and in case of poisonous agents infiltration to the object, it is turned on for ventilation reinforcement. It is designed for installation on the T-72, T-72A, Т-72Б, Т-55 and their modifications.скачать dle 12.0